AD 2006 Telemetry Module
Expansion Modules
M16-TR relay module
M16-HN 110 volt input module
Inputs per module :
Input voltage range :
Input impedance :
Commons per module :
16 opto - isolated
70-130 Volts AC or DC
27k Ohms
2 separate groups of 8
Isolation :
Module supply voltage :
Module power drain :
3.5kV
10-30VDC
No inputs driven - 200mW
All inputs driven - 1.2W
M8-AD 4-20mA analog input module
Inputs per module :
Input current range :
Input voltage range :
Input impedance :
Resolution :
8 channels common ground
0-20mA or 4-20mA
0-5V or 1-5V
250 Ohms (current mode)
12 bits
Accuracy :
Linearity :
Module supply voltage :
Module power drain :
0.1%
0.1%
10-30VDC
Idle 200mW
M4-DA 4-20mA analog output module
Outputs per module :
Output current range :
Load Impedance :
Resolution :
4 channels common ground
4-20mA
250 Ohms with 12V supply
500 Ohms with 24V supply
16 bits
Accuracy :
Linearity :
Module supply voltage :
Module power drain :
0.1%
0.1%
10-30VDC
Idle 200mW
Outputs per module :
Output current range :
Commons per module :
Total output capability :
16 Relays
2A @ 30VDC or 240VAC
2 separate groups of 8
10A per common
Isolation :
Module supply voltage :
Module power drain :
3.5kV
10-30VDC
No outputs driven - 200mW
All outputs driven - 2W
M16-LN low voltage input module
16 opto - isolated
10-35 Volts AC or DC
4k7 Ohms
2 separate groups of 8
3.5kV
10-30VDC
No inputs driven - 200mW
All inputs driven - 1.2W
Isolation :
Module supply voltage :
Module power drain :
Inputs per module :
Input voltage range :
Input impedance :
Commons per module :
The proven and versatile AD2006+ Advanced Telemetry Modules represent the state of the art in wireless Monitoring and Control. These modules are used extensively in Public Utility Infrastructure, Industrial Control, Environmental Management and Mining.
The AD2006+ combines many features in a single package, incorporating physical I/O and PLC logic, data interfaces and multiple communications facilities in the one module.
L400-REP
The L400-REP is a full duplex digital repeater designed to complement the advanced AD2006+ Telemetry Modules.
The standard unit comes in 19" rack format and covers the 406.1 - 480MHz frequency band. It can be supplied for operation with either an on-board or external duplexer.
AD2006+ BASE
The AD2006+ BASE assembly offers a robust Master Station solution for any SCADA network.
Whilst any AD2006+ module can act as a Master Station in its own right, the AD2006+ BASE provides all of the features of the AD2006+ series modules but is enhanced by an L400 data radio for greater radio coverage.
The AD2006+ BASE assembly can be supplied ex factory for installation in an existing electrical panel or supplied complete in an IP66 rated enclosure.
SCADA Monitoring & Control
On-board Data Radio as Standard
Multiple Data Radio Options
Multi-Session Ethernet Capability
IEC Ladder Diagram with PID
Serial RS232 & RS485 Ports
DNP3, Modbus and other Protocols
USB Programming Port
Windows 10 Compatible
