|
|
Products |
|
|
MiriAD 2000 Modules |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Radio Modems |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Applications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The following are the basic technical details of the AD2000 product.
IO Expansion Module Specifications
Download a full AD2000 Series product overview brochure here.
16 Digital Inputs
There are two ranges of input voltage available : -
10 - 50 Volts AC/DC Impedance 10k
50 -130 Volts AC/DC Impedance 47k
All inputs are optically isolated to 2.5kV
Pulse Inputs
All Digital Inputs can operate as pulse counters. The
first input is referred to the supply common and acts
as a fast pulse counter.
Input #1 can be configured as a pulse counter to 5kHz. into 4k7
Inputs 2 - 16 can be used as counters to 5hz.
8 Analog Inputs
The Analog Inputs are configurable as either : -
4 - 20mA / 1 - 5 Volts Resolution - 12 bits
0 - 20 mA / 0 - 5 Volts Accuracy - 0.1%
0 - 1 Volt Linearity - 0.1%
4 Digital Outputs
The Digital Outputs can be configured as either : -
Isolated Relays 2 form A
2 form C
5 Amps @ 30VDC
or 240VAC
Isolated or common Current - 100mA
ground transistors. Vcc max.- 35VDC
Isolation 2.5kV.
4 Analog Outputs
The last four analog channels can be configured as outputs in 4 - 20mA form : -
Resolution - 16 bits
Max. load resistance - 250 ohms
Accuracy - 0.1%
Linearity - 0.1%
Please note that the Analog Output facility is an
optional extra and is not included in the standard model.
IO Expansion Module Specifications
Currently the following IO Expansion modules are available to extend the IO capability of the AD2000 units:
AD2000 IO Expansion modules.PDF
M16-LN
10 - 50 Volts AC/DC Impedance 10k
A 16 point digital input module with RS485 bus connection and 10-30VDC power supply. DIN rail mounted with removable terminals and separate commons per 8 inputs.
All inputs are optically isolated to 2.5kV
M16-HN
50 -130 Volts AC/DC Impedance 47k
A 16 point digital input module with RS485 bus connection and 10-30VDC power supply. DIN rail mounted with removable terminals and separate commons per 8 inputs.
M16-TR
2 Amps @ 30VDC or 240VAC
A 16 point digital relay output module with RS485 bus connection and 10-30VDC power supply. DIN rail mounted with removable terminals and separate commons per 8 outputs.
M232-485
An RS232/RS485 (2 wire) converter to allow connection of the IO Expansion modules to existsing AD2000 RS232 ports. Allows up to a maximum of 32 modules per converter.
General Specifications for the AD2000
Power Supply
10.5 - 15 Volts DC (24VDC available)
200mA idling current ( including data radio )
Transmit current figures are shown in the table below.
Operating Temperature range
-10 to +70 degrees C.
Dimensions
202 x 178 x 60 mm mounting by custom mounting plate supplied
Weight
960 grams (including data radio)