|
|
Products |
|
|
MiriAD 2000 Modules |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Radio Modems |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Applications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ordering Information
AD2000 part numbers
(See below for information on ordering the correct radio type for your application if ordering the AD2000 units with internal radios fitted)
The AD2000 is available in several combinations and the part number designation below will ensure that the correct unit is supplied.
Download a detailed data sheet with ordering information AD2000 ordering information
For example type AD2000-R5212-LN-12 is an AD2000 configured as below:
- Internal radio installed, Type 52 (programmable to frequencies between 465MHz and 480MHz), 12.5kHz band (for 2400 bps operation)
- Low Voltage inputs fitted
- No analog outputs fitted
- 12VDC supplyled
Ordering the correct Radio Type
If you cannot specifiy the exact frequency, the radio type should be specified from the table below to ensure that the correct frequency band radio is supplied:
It is very important to ensure that when ordering 25kHz band
radios that the spectrum licence or allocation allows such channel occupation. Failure to do so could result in
interference with other users and possible prosecution and fines by local spectrum management authorities.
The default factory installed transmit power setting of the internal radio is 1W. Should other settings (up to
the 5W maximum) be required, please specify this at the time or ordering.
For unlicensed systems only 100mW settings can be supplied to satisfy regulatory authority requirements.
